MTH 30-20227-1 Burlington NW2 Diesel Switcher w/PS 3.0 #605 – Your Source for Gaming Essentials* Trains

Description

This is MTH 30-20227-1 O-27 NW2 w/PS3, CB&Q #605. NW-2 switcher diesel engine with Proto-Sound 3.0, Burlington. Cab number: 605. The NW2 was the big brother of the SW1 switcher. With a longer hood the NW2 housed a 12-cylinder diesel, twice as large as the prime mover in the SW1. The N in NW2 stood for nine hundred horsepower, the power output of the first Electro-Motive Corporation N-series switchers with Winton motors. Power increased to 1000 hp with the 1939 debut of the NW2, the first N-series locomotive with EMC’s new 567 diesel motor – the prime mover that would power nearly all of the most successful first-generation diesels. Within a few years, EMC and Winton Engine, which had been owned by GM since 1930, would become the Electro-Motive Division of General Motors.

EMD cataloged the NW2 for a decade, except for a hiatus in production from 1942-1945, ordered by the War Production Board. While rival manufacturers were asked to produce switchers, EMD was the only firm allowed to produce road diesels – a situation that, in retrospect, gave GM a commanding lead in the diesel revolution after the war.

By the end of NW2 production in 1949, over 1100 engines had been sold in the United States and Canada, and the hardy N-series switchers were ubiquitous from coast to coast. A popular, near-scale Lionel model ensured the engine was familiar to almost any boy who grew up in the 1950s.

An interesting variation was the calf. This cabless version was designed to be run in tandem with a normal NW2 for heavy-duty switching and transfer service between railroad yards. A number of railroads rostered TR2 cow-and-calf combinations, and the Chesapeake & Ohio owned two TR3 herds – a cow and two calves.

The NW2 returns to the RailKing lineup in 2014 with everything you need in a hard-working switcher: twin-motored pulling power down to 3 scale miles per hour, dual Proto-Couplers to drop off cars anywhere, and authentic EMD 567 sounds.

Did You Know?
The W in the NW and SW-series switchers stood for welded, to distinguish engines with welded frames from earlier models with cast steel frames made by General Steel Castings of Granite City, Illinois, a long-time supplier to the railroad industry.

Its key features are:
Intricately detailed ABS body
Die-cast truck sides, pilots and fuel tank
Metal chassis
Metal handrails and horn
Authentic paint scheme
Metal wheels, axles and gears
Two remote controlled Proto-Couplers
Prototypical Rule 17 lighting
Directionally controlled constant voltage LED headlights
Two precision flywheel-equipped motors
Onboard DCC receiver
Locomotive speed control in scale MPH increments
1:48 scale proportions
Proto-Sound 3.0 with The Digital Command System featuring: Freight yard Proto-Effects
Unit measures: 12 3/8 x 2 1/2 x 3 7/8
Operates on O-27 curves

Diesel DCC features:
Headlight/Taillight
Bell
Horn
Start-up/Shut-down
Passenger station/Freight yard announcements
Lights (except head/tail)
Master volume
Front coupler
Rear coupler
Forward signal
Reverse signal
Grade crossing
Idle sequence 3
Idle sequence 2
Idle sequence 1
Extended start-up
Extended shut-down
Rev up
Rev down
One shot Doppler
Coupler slack
Coupler close
Single horn blast
Engine sounds
Brake sounds
Cab chatter
Feature reset
Idle sequence 4
Clickety clack (on/off)

Condition: Factory New (C-9)
Operational Status: Functional
Original Box: Yes (P-9)

Manufacturer: MTH
Model Number: 30-20227-1
Road Name: Chicago Burlington & Quincy (CBQ)
MSRP: $309.95

Scale/Era: O Modern
Model Type: Diesel Loco

The Trainz SKU for this item is P12083695.

Trainz Product Id: 12083695